Avigilon ACC Core Web Version 5.2 Manuel d'utilisateur télécharger pdf (Page 25)

Video

To program a PTZ preset

1. Move the camera's field of view into position.

2. In the Preset drop down list, select a n

umber then

click .

3. In the dialog box, enter a name for the preset.

4. Select the Set as home preset check box if you

want this to be the camera's Home preset.

5. Click OK.

To activate a PTZ preset Select a preset then click .

To return to the Home preset position

If the PTZ camera supports a Home preset

position, click to return the camera to its Home

position.

To program a PTZ pattern

1. In the PTZ controls pane, select a pattern number

and click .

2. Use the PTZ controls to move the camera and

create the pattern.

3. Click to stop recording the pattern.

To activate a PTZ pattern

In the PTZ controls pane, select a pattern number

and click .

The pattern will repeat until the pattern is stopped

or another pattern is run.

To activate a PTZ tour

In the PTZ controls pane, select a tour number and

click .

The tour will repeat until stopped or until other PTZ

controls are used.

To activate an auxiliary command

1. Select an aux command number and click .

2. Click to turn off the auxiliary output.

To display the PTZ camera onscreen

1. Click .

2. To move through the menu options, click any of

the following:

o Click to move down the options.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 56 57

Pas de commentaire

Avigilon ACC Core Web Version 5.2 Manuel d'utilisateur Page 25